SMS Remote Monitoring Control SD

• 10 programmable Hand phone Number.
• Send upon input change state
• Monitoring up to 8 inputs
• Total characters of 8 inputs Name must not more than 130 characters.
• Each input Name  characters cannot exceed 24 characters.
• SMS will report the input status in one shot.
• SMS send upon Any input change state
• Configure via SD card ( Simple Text file “smsfile.txt”. Can use any PC to edit
• Configure via SMS
• Remote control of 2 relay ( optional )
• Periodic Time Reporting ( optional )

SD file “smsfile.txt” format

The smsfile.txt must be in the following format

001.96580564#                       ( Master 1  Handphone number Example Only)                   

002.97525928#                       ( Master 2  Handphone number )         

003.A3333333#                       ( 3^rd handphone number If 1^st number is A,  this number will be ignored)

004.97513586#                       ( 4^th handphone number If 1^st number is A,  this number will be ignored)

005.A5555555#                       ( 5^th handphone number If 1^st number is A,  this number will be ignored)

006.A6666666#                       ( 6^th handphone number If 1^st number is A,  this number will be ignored)

007.A7777777#                       ( 7^th handphone number If 1^st number is A,  this number will be ignored)

008.A8888888#                       ( 8^th handphone number If 1^st number is A,  this number will be ignored)

009.A9999999#                       ( 9^th handphone number If 1^st number is A,  this number will be ignored)

010.01010101#                       ( 10^th handphone number If 1^st number is A,  this number will be ignored)       

011.alarm1-fail-111#             ( input 1 close contact Text  Example only)

012.alarm1-ok-11111#           ( input 1 open contact Text )

013.alarm2-fail-222#             ( input 2 close contact Text )

014.alarm2-ok-22222#           ( input 2 open contact Text )

015.alarm3-fail-333#             ( input 3 close contact Text )

016.alarm3-ok-33333#           ( input 3 open contact Text )

017.alarm4-fail-444#             ( input 4 close contact Text )

018.alarm4-ok-44444#           ( input 4 open contact Text )

019.alarm5-fail-555#             ( input 5 close contact Text )

020.alarm5-ok-5555#             ( input 5 open contact Text )

021.alarm6-fail-666#             ( input 6 close contact Text )

022.alarm6-ok-66666#           ( input 6 open contact Text )

023.alarm7-fail-777#             ( input 7 close contact Text )

024.alarm7-ok-77777#           ( input 7 open contact Text )

025.alarm8-fail-888#             ( input 8 close contact Text )

026.alarm8-ok-88888#           ( input 8 open contact Text )

027.fancypressize#                 ( Prefix )

028.relay1_delay_on_off#      ( relay 1 on for approximately 1 second and off Text. Example only)

029.relay2_delay_on_off#      ( relay 2 on for approximately 1 second and off Text )

030.relay1_on#                       ( relay 1 on Text )

031.relay2_on#                       ( relay 2 on Text )

032.relay1_off#                      ( relay 1 off Text )

033.relay2_off#                      ( relay 2 off Text )

Dummy

Operation :

Power up

Upon power up , LCD display “SMS power up” at the sametime

it will send “SMS power up “ message to Master 1 & Master 2 hand phone.

LCD display

LCD screen display “ Monitoring “ if all input are open contact. If any of the input is close contact. It

Will display “… Alarm …”

If there is a change in input state, the device will SMS the change of input state to the owner.

Example :  Assume input 1 and input 2 is close contact, Message

                  “ Fancyprezzie alarm1- fail alarm2 fail “ will send out.

                   Assume after sometime, input 1 back to open contact.

                    Message “ Fancyprezzie alarm1 ok “ will send out.

Remote read 10 handphone number

SMS “*list_hp#”

Remote read all the alarm and control message

SMS “*list_mess#”

To remote activate Relay 1 momentarily

SMS “relay1_delay_on_off#”

To remote activate Relay 1 momentarily

SMS “relay2_delay_on_off#”

To remote on Relay 1

SMS “relay1_ on #”

To remote on Relay 2

SMS “relay2_ on #”

To remote off Relay 1

SMS “relay1_ off #”

To remote off Relay 2

SMS “relay2_ off #”

To change/edit handphone number, alarm and control message

The smsfile.txt must be in the following format

001.96580564#                  ( Master 1  Handphone number Example Only)                 

002.97525928#                  ( Master 2  Handphone number )            

003.A3333333#                  ( 3^rd handphone number If 1^st number is A,  this number will be ignored)

004.97513586#                  ( 4^th handphone number If 1^st number is A,  this number will be ignored)

005.A5555555#                  ( 5^th handphone number If 1^st number is A,  this number will be ignored)

006.A6666666#                  ( 6^th handphone number If 1^st number is A,  this number will be ignored)

007.A7777777#                  ( 7^th handphone number If 1^st number is A,  this number will be ignored)

008.A8888888#                  ( 8^th handphone number If 1^st number is A,  this number will be ignored)

009.A9999999#                  ( 9^th handphone number If 1^st number is A,  this number will be ignored)

010.01010101#                  ( 10^th handphone number If 1^st number is A,  this number will be ignored)            

011.alarm1-fail-111#       ( input 1 close contact Text  Example only)

012.alarm1-ok-11111#   ( input 1 open contact Text )

013.alarm2-fail-222#       ( input 2 close contact Text )

014.alarm2-ok-22222#   ( input 2 open contact Text )

015.alarm3-fail-333#       ( input 3 close contact Text )

016.alarm3-ok-33333#   ( input 3 open contact Text )

017.alarm4-fail-444#       ( input 4 close contact Text )

018.alarm4-ok-44444#   ( input 4 open contact Text )

019.alarm5-fail-555#       ( input 5 close contact Text )

020.alarm5-ok-5555#      ( input 5 open contact Text )

021.alarm6-fail-666#       ( input 6 close contact Text )

022.alarm6-ok-66666#   ( input 6 open contact Text )

023.alarm7-fail-777#       ( input 7 close contact Text )

024.alarm7-ok-77777#   ( input 7 open contact Text )

025.alarm8-fail-888#       ( input 8 close contact Text )

026.alarm8-ok-88888#   ( input 8 open contact Text )

027.fancypressize#                         ( Prefix )

028.relay1_delay_on_off#      ( relay 1 on for approximately 1 second and off Text. Example only)

029.relay2_delay_on_off#          ( relay 2 on for approximately 1 second and off Text )

030.relay1_on#                 ( relay 1 on Text )

031.relay2_on#                 ( relay 2 on Text )

032.relay1_off#                                ( relay 1 off Text )

033.relay2_off#                                ( relay 2 off Text )

Dummy

Remote SMS programming

SMS the following Text to the SMS Remote Monitoring Control SD– 100

Note : Only Master 1 and Master 2 able to do the programming.

*save_001:96580564#    ( Master 1  Handphone number Example Only)                 

*save_002:97515927#    ( Master 2  Handphone number )            

*save_003:A3333333#   ( 3^rd handphone number If 1^st number is A,  this number will be ignored)

*save_004:97513586#    ( 4^th handphone number If 1^st number is A,  this number will be ignored)

*save_005:A5555555#   ( 5^th handphone number If 1^st number is A,  this number will be ignored)

*save_006:A6666666#   ( 6^th handphone number If 1^st number is A,  this number will be ignored)

*save_007:A7777777#   ( 7^th handphone number If 1^st number is A,  this number will be ignored)

*save_008:A8888888#   ( 8^th handphone number If 1^st number is A,  this number will be ignored)

*save_009:A9999999#   ( 9^th handphone number If 1^st number is A,  this number will be ignored)

*save_010:01010101#    ( 10^th handphone number If 1^st number is A,  this number will be ignored)            

*save_011:alarm1-fail-111#        ( input 1 close contact Text  Example only)

*save_012:alarm1-ok-1111#       ( input 1 open contact Text )

*save_013:alarm2-fail-222#        ( input 2 close contact Text )

*save_014:alarm2-ok-2222#       ( input 2 open contact Text )

*save_015:alarm3-fail-333#        ( input 3 close contact Text )

*save_016:alarm3-ok-3333#       ( input 3 open contact Text )

*save_017:alarm4-fail-444#        ( input 4 close contact Text )

*save_018:alarm4-ok-4444#       ( input 4 open contact Text )

*save_019:alarm5-fail-555#        ( input 5 close contact Text )

*save_020:alarm5-ok-5555#       ( input 5 open contact Text )

*save_021:alarm6-fail-666#        ( input 6 close contact Text )

*save_022:alarm6-ok-6666#       ( input 6 open contact Text )

*save_023:alarm7-fail-777#        ( input 7 close contact Text )

*save_024:alarm7-ok-7777#       ( input 7 open contact Text )

*save_025:alarm8-fail-888#        ( input 8 close contact Text )

*save_026:alarm8-ok-8888#       ( input 8 open contact Text )

*save_027:fancypressize#           ( Prefix )

*save_028:relay1_delay_on_off#     ( relay 1 on for approximately 1 second and off Text. Example only)

*save_029:relay2_delay_on_off#     ( relay 2 on for approximately 1 second and off Text )

*save_030:relay1_on#                  ( relay 1 on Text )

*save_031:relay2_on#  ( relay 2 on Text )

*save_032:relay1_off# ( relay 1 off Text )

*save_033:relay2_off# ( relay 2 off Text )